A standard vertical queen Murphy bed measures 87–89 inches high, 64–68 inches wide, and 16–21 inches deep when closed. When opened, it extends 85–90 inches into the room and holds a standard 60 × 80 inch (152 × 203 cm) queen mattress. Most homeowners should allow at least a 10 × 10-foot room for comfortable use.
queen Murphy bed measurements for both vertical and horizontal models, room measurement techniques, comparison charts with other bed sizes, cabinet depth specifications, and space planning tips for guest rooms, studios, and home offices.
Understanding Queen Murphy Bed Dimensions
Standard queen Murphy bed dimensions vary based on orientation and manufacturer. Most vertical models measure 87-89 inches high, 64-68 inches wide, and 16-21 inches deep when closed.
When fully extended, these beds project 85-90 inches from the wall. This projection measurement is crucial for determining if your room has adequate floor space for comfortable movement and bed-making.
Queen Murphy Bed Dimensions
| Feature | Queen Murphy Bed |
|---|---|
| Cabinet Height | 87–89 in |
| Cabinet Width | 64–68 in |
| Cabinet Depth | 16–21 in |
| Open Projection | 85–90 in |
| Mattress Size | 60 × 80 in |
| Metric Mattress Size | 152 × 203 cm |
| Minimum Room Size | 10 × 10 ft |
| Best For | Couples, Guest Rooms, Apartments, Home Offices |
Quick Answer: A standard vertical queen Murphy bed measures 87–89 inches high, 64–68 inches wide, and 16–21 inches deep when closed. When opened, it projects 85–90 inches into the room. Most models fit a standard 60 × 80 inch (152 × 203 cm) queen mattress and work best in rooms measuring at least 10 × 10 feet.
Standard Queen Murphy Bed Measurements
A queen Murphy bed cabinet typically requires 65-68 inches of wall width. The height ranges from 87-89 inches for vertical models, making them suitable for standard 8-foot ceilings with minimal clearance.
Closed depth measures between 16-21 inches, depending on cabinet design and mattress thickness. Deep-design models add 5 inches for built-in shelving, perfect for storing pillows and bedding when the bed is raised.
Vertical vs Horizontal Queen Murphy Bed Sizes
Vertical queen Murphy beds fold down lengthwise from the headboard. They measure 87-89 inches high and 64-68 inches wide when closed, requiring adequate ceiling height for safe operation.
Horizontal queen Murphy beds fold sideways and measure 68-70 inches high by 85-90 inches wide. These work perfectly in rooms with lower ceilings or under sloped attic spaces where vertical models won’t fit.
Queen Bed and Mattress Dimensions(Size, Height, Length & Width)
Space Requirements for Queen Murphy Beds
Your room needs enough space for the bed projection plus walking clearance. Plan for at least 30-36 inches of clearance on accessible sides for comfortable bed-making and movement.
Total floor space required includes the 85-90 inch projection plus additional clearance. A room measuring 10×10 feet comfortably accommodates a queen size Murphy bed with adequate movement space on all sides.
More posts:Full XL Bed And Mattress Dimensions(Size, Height, Length & Width)
Vertical Queen Murphy Bed Dimensions Explained
Vertical queen Murphy beds headboard section mounts to the wall, and the bed folds down toward the floor, extending into the room lengthwise.
This orientation maximizes floor space in rooms with adequate ceiling height.
Closed Cabinet Dimensions
When closed, a vertical queen Murphy bed measures 87-89 inches tall and 64-68 inches wide. The depth typically ranges from 16-21 inches, creating a slim profile against your wall.
Cabinet depth increases to 21-26 inches for models with integrated shelving or storage compartments.
Open Bed Projection Measurements
A fully deployed vertical queen Murphy bed extends 85-90 inches from the wall. This measurement includes the mattress, frame, and any decorative headboard elements attached to the cabinet.
Add 12-24 inches beyond this projection for comfortable bed-making and movement.
Best Room Sizes for Vertical Queen Murphy Beds
Rooms measuring 10×10 feet or larger comfortably accommodate vertical queen Murphy beds. This size provides adequate projection space plus the recommended 30-36 inches of side clearance.
Guest rooms measuring 10×12 feet work perfectly, leaving space for a small dresser or chair. Studio apartments larger than 300 square feet benefit from vertical queen models, creating distinct sleeping and living zones.
King Bed Size and mattress Dimensions(Size, Height, Length & Width)
Horizontal Queen Murphy Bed Dimensions
Horizontal queen Murphy beds fold sideways into the wall rather than lengthwise. One side mounts to the wall while the opposite side folds upward, creating a wide but shorter closed cabinet.
When to Choose Horizontal Over Vertical
Choose horizontal Murphy beds when ceiling height measures less than 8 feet. These models require only 68-70 inches of vertical space compared to 87-89 inches for vertical designs.
Wide rooms with limited height benefit most from horizontal orientation. The bed extends just 65-68 inches from the wall when open, reducing projection requirements compared to vertical models extending 85-90 inches.
Complete Horizontal Queen Measurements
A horizontal queen Murphy bed measures 68-70 inches high and 85-90 inches wide when closed. The cabinet depth remains similar at 16-20 inches, maintaining a compact profile against your wall.
When deployed, these beds project 65-68 inches from the wall. This shorter projection saves valuable floor space in tight rooms, though one side remains against the wall, limiting bed access.
Low Ceiling Solutions
Rooms with 7-foot ceilings work perfectly with horizontal queen Murphy beds. The 68-70 inch height requirement leaves adequate clearance for safe operation without hitting ceiling fans or light fixtures.
Queen Murphy Bed Dimensions Compared to Other Sizes
Understanding how queen Murphy bed dimensions compare to other sizes helps you choose the perfect fit.
Queen vs Full Murphy Bed Dimensions
Full Murphy beds measure 57-61 inches wide compared to 64-68 inches for queen models. This 7-inch width difference may seem small but significantly impacts sleeping comfort for couples.
Height remains similar at 82-87 inches for both sizes. The projection difference is minimal, with full beds extending 80-82 inches versus 85-90 inches for queens when deployed.
Queen vs Twin Murphy Bed Dimensions
Twin Murphy beds measure just 43-46 inches wide compared to the queen’s 64-68 inches. This dramatic 21-inch difference makes twins ideal for single sleepers or children’s rooms.
Twin models save considerable wall space, requiring only 43-46 inches of width. However, projection lengths remain comparable at 80-82 inches, similar to larger sizes when fully extended.
Queen vs King Murphy Bed Dimensions
King Murphy beds measure 84-86 inches wide, adding 16-20 inches over queen models. This extra width demands significantly more wall space and requires rooms with adequate clearance on both sides.
Height increases to 89-92 inches for king sizes, often requiring 9-foot ceilings for safe operation. The projection extends 85-90 inches, matching queen models despite the increased width.
Queen vs California King Murphy Bed
California king Murphy beds are designed for sleepers who need extra legroom rather than additional width. A California king mattress measures 72 × 84 inches, making it 4 inches narrower but 4 inches longer than a standard king.
Because of the longer mattress, California king Murphy beds usually require a taller cabinet and more wall height than queen models. They are best suited for larger bedrooms with high ceilings.
Full Size Bed and Mattress Dimensions(Size, Height, Length & Width)
All Murphy Bed Dimensions
| Bed Size | Height (Closed) | Width (Closed) | Depth (Closed) | Projection (Open) |
|---|---|---|---|---|
| Twin | 82–87 inches | 43–46 inches | 16–21 inches | 80–82 inches |
| Twin XL | 87–89 inches | 43–46 inches | 18–21 inches | 85–87 inches |
| Full | 82–87 inches | 57–61 inches | 16–21 inches | 80–82 inches |
| Queen | 87–89 inches | 64–68 inches | 16–21 inches | 85–90 inches |
| King | 89–92 inches | 84–86 inches | 16–21 inches | 85–90 inches |
Queen Murphy Bed Cabinet and Storage Dimensions
Murphy bed cabinets include more than just the folding bed mechanism. Many models incorporate side storage, shelving units, and decorative elements that affect total wall space requirements.
What Mattress Works Best in a Queen Murphy Bed?
Most queen Murphy beds accept standard queen mattresses measuring 60 × 80 inches, but manufacturers often recommend a mattress thickness between 8 and 12 inches.
Common compatible mattress types include:
- Memory foam
- Hybrid
- Latex
- Pocket coil
- Innerspring (if within thickness limits)
Always check the manufacturer’s maximum mattress weight and thickness before purchasing.
Can You Use a Box Spring with a Murphy Bed?
No. Most Murphy beds are designed to support the mattress directly on a built-in platform or metal frame. A traditional box spring usually makes the mattress too thick for the cabinet to close properly.
If additional support is needed, choose a Murphy bed specifically designed for thicker mattresses or use the manufacturer’s recommended foundation system.
Standard Cabinet Depth and Width
Standard cabinet depth ranges from 16-21 inches when measuring from the wall to the cabinet face. This slim profile keeps the bed inconspicuous when stored during daytime hours.
Cabinet width for queen models measures 64-68 inches, matching the mattress width. Add 2-4 inches for cabinet frame thickness, bringing total width to approximately 66-72 inches wall-to-wall.
Side Cabinet Options and Measurements
Side cabinets add valuable storage while framing your Murphy bed attractively. These units typically measure 18, 24, or 30 inches wide and match the bed’s height at 87-89 inches.
Adding two side cabinets dramatically increases total width requirements. A queen bed with two 24-inch cabinets spans 112-116 inches total, requiring nearly 10 feet of wall space.
Total Wall Space Required
Calculate total wall space by adding bed width plus side storage widths. A basic queen Murphy bed needs 65-68 inches, while models with integrated features require 90-120 inches.
Minimum room width should exceed total cabinet width by 12-24 inches. This extra space accommodates baseboard removal, ensures proper door swing clearance, and allows comfortable access to side storage compartments.
Choosing the Right Queen Murphy Bed Size for Your Space
Selecting appropriate queen Murphy bed dimensions depends on your room’s function and available space.
Is a Queen Murphy Bed Good for Couples?
Yes. A queen Murphy bed is one of the best Murphy bed sizes for couples. It uses the same 60 × 80 inch mattress found in traditional queen beds, giving two adults enough sleeping space for everyday comfort.
For guest rooms, vacation homes, and studio apartments, a queen Murphy bed offers an excellent balance between sleeping space and floor space.
Guest Room Dimensions
Guest rooms measuring 10×12 feet work perfectly for queen Murphy beds. This size provides 85-90 inches of projection space plus comfortable clearance for guests to move around freely.
Add side storage cabinets in larger guest rooms measuring 12×14 feet or more. The extra storage gives visitors a place for clothing and belongings without requiring additional furniture pieces.
Studio Apartment Layouts
Studio apartments benefit tremendously from queen Murphy beds when total square footage exceeds 300 square feet. The bed stores vertically during the day, creating open living space for work and relaxation.
Home Office Conversion Measurements
Home offices measuring 10×11 feet or larger accommodate queen Murphy beds alongside desk setups. Choose vertical mounting to preserve wall space for bookshelves, filing cabinets, and office storage.
FAQ’s
What are the exact dimensions of a queen Murphy bed?
Vertical queen Murphy beds measure 87-89 inches high, 64-68 inches wide, and 16-21 inches deep when closed, extending 85-90 inches from the wall when open.
How much wall space does a queen Murphy bed need?
A queen Murphy bed requires minimum 65-68 inches of wall width and 87-89 inches of height, plus 2.5 inches ceiling clearance for safe operation without obstructions.
What is the minimum room size for a queen Murphy bed?
The minimum room size is 10×10 feet to accommodate the 85-90 inch bed projection plus 30-36 inches of side clearance for comfortable movement and bed-making.
How far does a queen Murphy bed extend from the wall?
A queen Murphy bed extends 85-90 inches from the wall when fully deployed, requiring adequate floor space plus 12-24 inches additional clearance for comfortable access.
What’s the difference between vertical and horizontal queen Murphy bed dimensions?
Vertical models measure 87-89 inches high and 64-68 inches wide, while horizontal versions are 68-70 inches high and 85-90 inches wide, perfect for low ceilings.
Can a queen Murphy bed fit in a standard 8-foot ceiling room?
Yes, queen Murphy beds fit in 8-foot ceiling rooms as they require 87-89 inches height plus 2.5 inches minimum clearance, totaling 89.5-91.5 inches or about 7.5 feet.
What mattress thickness works with queen Murphy beds?
Most queen Murphy beds accommodate mattresses 10-12 inches thick, though some deep-cabinet models handle up to 15 inches without preventing proper bed closure or storage.
Queen murphy bed
A queen Murphy bed is a space-saving wall bed designed to fold up when not in use while fitting a standard queen mattress.
The best queen Murphy bed for small spaces maximizes floor space without sacrificing comfort.
Queen murphy bed with desk
A queen Murphy bed with desk combines a fold-down bed and workspace, making it ideal for home offices and multipurpose rooms.
The queen Murphy bed with built-in desk is perfect for maximizing functionality in compact spaces.
Queen murphy bed cabinet
A queen Murphy bed cabinet looks like a stylish storage cabinet but opens into a full queen-size bed.
The queen Murphy bed cabinet with mattress offers a space-saving solution without permanent wall installation.
Queen murphy bed with couch
A queen Murphy bed with couch features a sofa that remains in place while the bed folds down over it.
The queen Murphy bed with sofa is ideal for studio apartments and guest rooms.
Horizontal queen murphy bed
A horizontal queen Murphy bed folds sideways instead of vertically, making it suitable for rooms with lower ceilings.
The horizontal queen Murphy bed design works well in wide rooms with limited wall height.
Queen murphy bed kit
A queen Murphy bed kit includes the hardware and mechanisms needed to build a fold-away bed frame.
The DIY queen Murphy bed kit simplifies installation for custom woodworking projects.
Queen murphy bed with storage
A queen Murphy bed with storage includes shelves, drawers, or cabinets for added organization and convenience.
The queen Murphy bed with storage cabinets is ideal for maximizing space in smaller bedrooms.
Queen murphy bed ikea
IKEA does not currently sell a true queen Murphy bed, but many people combine IKEA storage units with compatible Murphy bed systems.
The IKEA-style queen Murphy bed alternatives offer affordable space-saving furniture solutions.
Queen murphy bed dimensions
A queen Murphy bed fits a standard 60 × 80-inch queen mattress, while the cabinet dimensions vary by manufacturer.
The queen Murphy bed dimensions with cabinet should always be checked before installation.
Queen murphy bed frame
A queen Murphy bed frame is the structural base that supports the mattress and folding mechanism.
The queen Murphy bed frame with hardware ensures safe operation and long-lasting durability.
Can a queen Murphy bed fit a standard queen mattress?
Yes. Most queen Murphy beds are designed to hold a standard 60 × 80-inch queen mattress. However, manufacturers often limit mattress thickness and weight, so always check the product specifications before purchasing a new mattress.
What is the ideal mattress thickness for a queen Murphy bed?
Most manufacturers recommend a mattress between 8 and 12 inches thick. A mattress that is too thick may prevent the cabinet from closing properly, while one that is too thin may reduce sleeping comfort.
Do queen Murphy beds need to be attached to the wall?
Most traditional Murphy beds must be securely anchored to wall studs or another approved structural surface. Proper installation improves safety, stability, and long-term performance.
Can you use a queen Murphy bed every night?
Yes. A high-quality queen Murphy bed is built for daily use when paired with a durable mattress and installed correctly. Many homeowners use them as their primary bed in apartments, studios, and multifunctional rooms.
How much wall space does a queen Murphy bed require?
A standard vertical queen Murphy bed typically needs 65–68 inches of wall width. Models with side cabinets or shelving may require 90–120 inches of total wall space.
Is a queen Murphy bed suitable for a home office?
Yes. A queen Murphy bed is a popular option for home offices because it folds neatly into a cabinet during the day, allowing the room to function as a workspace without sacrificing a comfortable guest bed.
What’s the difference between a queen Murphy bed and a cabinet bed?
A queen Murphy bed folds vertically or horizontally into a wall-mounted cabinet, while a cabinet bed folds out from a freestanding furniture cabinet. Cabinet beds are generally easier to install but usually have a smaller footprint and different mattress options.
Can a queen Murphy bed be installed on any wall?
Not always. The wall must be structurally sound and suitable for anchoring the bed. Wood studs and concrete walls are common installation surfaces, while some steel-stud walls may require additional reinforcement or specialized hardware.
Do Murphy beds work with memory foam mattresses?
Yes, provided the mattress meets the manufacturer’s thickness and weight limits. Memory foam mattresses are a popular choice because they flex easily, distribute weight well, and can remain strapped in place when the bed is folded away.
How much clearance should you leave around a queen Murphy bed?
Leave at least 30–36 inches of walking space around accessible sides of the open bed. Also ensure there is enough clearance for doors, ceiling fans, light fixtures, and nearby furniture to avoid interference during operation.
Conclusion
Queen Murphy bed dimensions ensures you make a smart investment that perfectly fits your space.
Measure your room carefully, considering both closed cabinet size and open projection requirements before purchasing.
Whether you choose vertical or horizontal orientation, a queen Murphy bed transforms cramped rooms into functional, flexible spaces. Use this guide’s measurement charts and planning tips to select the ideal size for comfortable, space-saving sleeping solutions.
Hi, I’m Ethan Miller, the admin behind QueenDimensions.com. We make understanding Dimensions simple. Explore clear guides on realms, energy, and hidden layers of reality. No confusion, just clarity.
